Short Description
Sealbase is a torch applied roofing membrane which comprises of a 50g/m² glass fibre base, coated with APP modified bitumen
Product Information
Finished with talc on the top and surfaced on the underside with flame dispersible polyethylene. Sealbase is an economic underlay which can also be used as a vapour check. Sealbase torch-applied should be installed in accordance with BS 8217: 2005, Code of Practice for built up roofing and to IKO specifications. Sealbase application should follow the recommended good practices for torch-applied membranes. Care must be taken when using Sealbase in close proximity to combustible materials, decorative coatings and heat sensitive materials. Apply Sealbase by melting the heat dispersible backing and coating to create a molten flow in front of the roll. The flame of the torch should be applied at the low point where the roll meets the substrate. As the film and bitumen melts, roll the roofing forward. A bead of bitumen must exude from all lap joints to ensure a seal. Vapour control layers should always marry up with the waterproofing system to ensure the insulation is enveloped at all times.
Features And Benefits
- 2mm
Dimensions
| Product Width | 1.00 m |
| Product Length | 10.00 m |
| Product Volume | 10.00 |
Specifications
| 2mm | Thickness |
Find out more
Sealbase 2mm Torch On Underlay Felt 10m x 1m
Short Description
Sealbase is a torch applied roofing membrane which comprises of a 50g/m² glass fibre base, coated with APP modified bitumen
Product Information
Finished with talc on the top and surfaced on the underside with flame dispersible polyethylene. Sealbase is an economic underlay which can also be used as a vapour check. Sealbase torch-applied should be installed in accordance with BS 8217: 2005, Code of Practice for built up roofing and to IKO specifications. Sealbase application should follow the recommended good practices for torch-applied membranes. Care must be taken when using Sealbase in close proximity to combustible materials, decorative coatings and heat sensitive materials. Apply Sealbase by melting the heat dispersible backing and coating to create a molten flow in front of the roll. The flame of the torch should be applied at the low point where the roll meets the substrate. As the film and bitumen melts, roll the roofing forward. A bead of bitumen must exude from all lap joints to ensure a seal. Vapour control layers should always marry up with the waterproofing system to ensure the insulation is enveloped at all times.
Features And Benefits
- 2mm
Dimensions
| Product Width | 1.00 m |
| Product Length | 10.00 m |
| Product Volume | 10.00 |
Specifications
| 2mm | Thickness |
Find out more
-
Product Code: 19988OSB Board Square Edge - 2440mm X 1220mm X 18mm (8Ft X 4Ft approx)Available for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
€22.60 ex VAT€27.80 inc VAT€22.60 ex VAT€27.80inc VAT