Short Description
The Makita DTM50 LXT Multi-Tool has a conveniently located thumb On/Off switch for ease of use when holding the machine. It has an easy-to-use variable speed control dial and a hex wrench holder on the body. Uses an OIS interface. Accessories can be installed at 30° increments, across 360° and it comes with a dust extraction attachment.
Product Information
Specification: No Load Speed: 6,000-20,000/min. Oscillation Angle: 3.2° Weight: 2.0kg All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration K Factor: 1.5 m/sec² Vibration: Cutting Metal: 5 m/sec² Vibration: Cutting Wood: 9.5 m/sec² Vibration: Chiselling: 7.5 m/sec² Vibration: Sanding: 2.5 m/sec² The Makita DTM50Z Multi-Tool is supplied as a bare unit, no battery or charger supplied.
Features And Benefits
- DTM50 Multi-Tool has a conveniently located thumb On/Off switch for ease of use. Uses an OIS interface. Accessories can be installed at 30º increments, across 360º and it comes with a dust extraction attachment.
- No Load Speed: 6,000-20,000/min.
- No Load Speed: 6,000-20,000/min.
- Oscillation Angle: 3.2°
- Weight: 2.0kg
Dimensions
| Product Width | 300.00 mm |
| Product Length | 110.00 mm |
| Product Height / Depth | 100.00 mm |
| Product Weight | 1.67 kg |
| Product Volume | 0.00 |
Find out more
Makita Multi Tool 18v Body Only Dtm50z
Short Description
The Makita DTM50 LXT Multi-Tool has a conveniently located thumb On/Off switch for ease of use when holding the machine. It has an easy-to-use variable speed control dial and a hex wrench holder on the body. Uses an OIS interface. Accessories can be installed at 30° increments, across 360° and it comes with a dust extraction attachment.
Product Information
Specification: No Load Speed: 6,000-20,000/min. Oscillation Angle: 3.2° Weight: 2.0kg All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration K Factor: 1.5 m/sec² Vibration: Cutting Metal: 5 m/sec² Vibration: Cutting Wood: 9.5 m/sec² Vibration: Chiselling: 7.5 m/sec² Vibration: Sanding: 2.5 m/sec² The Makita DTM50Z Multi-Tool is supplied as a bare unit, no battery or charger supplied.
Features And Benefits
- DTM50 Multi-Tool has a conveniently located thumb On/Off switch for ease of use. Uses an OIS interface. Accessories can be installed at 30º increments, across 360º and it comes with a dust extraction attachment.
- No Load Speed: 6,000-20,000/min.
- No Load Speed: 6,000-20,000/min.
- Oscillation Angle: 3.2°
- Weight: 2.0kg
Dimensions
| Product Width | 300.00 mm |
| Product Length | 110.00 mm |
| Product Height / Depth | 100.00 mm |
| Product Weight | 1.67 kg |
| Product Volume | 0.00 |



