Short Description
EPS Pressflo MULTI 16A 230V 1"
Product Information
PRESFLO MULTI is an automatic pump control, which starts and stops the pump ‘on demand’. When a valve or tap is opened on the outlet side of the control, the PRESFLO MULTI senses the drop in pressure and instantly starts the pump when the pressure drops below the pre-setted starting pressure from 1 bar till 5 bar. When the valve is closed the pump continues to run for a further ….seconds to prevent water hammer, and then stops ready for the next demand for water. If the pump runs out of water during operation, the PRESFLO MULTI will automatically shut down the
Features And Benefits
- Substantial 3L built in surge tank with ability to set tank pressure as desired in order to guarantee optimum protection
- Gives draw off for small demands and less starts in leaking systems
- Selectable pump start up pressure between 1 and 5 bar (0.5 bar increments) via screw adjustmentsAdjustable overload protection via a simple screw
- Sturdy and reliable pressure sensor connected to circuit board.
- System protection against dry running with automatic restart and excessively frequent starting, Tropicalised electronics, Shut down flow rate of 2 litres per minute
Dimensions
| Product Width | 166.00 mm |
| Product Length | 303.00 mm |
| Product Height / Depth | 168.00 mm |
| Product Weight | 1.90 kg |
Specifications
| CUT-IN PRESSURE | Adjustable |
| 16 Amp , flow rate | 12 m3/h |
Find out more
EPS Presflo Multi 16amp 1" comes with Vessel
Short Description
EPS Pressflo MULTI 16A 230V 1"
Product Information
PRESFLO MULTI is an automatic pump control, which starts and stops the pump ‘on demand’. When a valve or tap is opened on the outlet side of the control, the PRESFLO MULTI senses the drop in pressure and instantly starts the pump when the pressure drops below the pre-setted starting pressure from 1 bar till 5 bar. When the valve is closed the pump continues to run for a further ….seconds to prevent water hammer, and then stops ready for the next demand for water. If the pump runs out of water during operation, the PRESFLO MULTI will automatically shut down the
Features And Benefits
- Substantial 3L built in surge tank with ability to set tank pressure as desired in order to guarantee optimum protection
- Gives draw off for small demands and less starts in leaking systems
- Selectable pump start up pressure between 1 and 5 bar (0.5 bar increments) via screw adjustmentsAdjustable overload protection via a simple screw
- Sturdy and reliable pressure sensor connected to circuit board.
- System protection against dry running with automatic restart and excessively frequent starting, Tropicalised electronics, Shut down flow rate of 2 litres per minute
Dimensions
| Product Width | 166.00 mm |
| Product Length | 303.00 mm |
| Product Height / Depth | 168.00 mm |
| Product Weight | 1.90 kg |
Specifications
| CUT-IN PRESSURE | Adjustable |
| 16 Amp , flow rate | 12 m3/h |