Short Description
The EPS Integrated UV System is a plug & play disinfection solution. This system is designed to provide high flow and low pressure drop, with a maximum flow rate 2.5 m3/hr*.
Product Information
Powertank Integrated UV System - For Variable Speed Units
\nINSTALLATION & USE \n \nUV systems deactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, and harmful bacteria like Legionella & E.Coli which may be present in some incoming water supplies. \n \nSTAGE 1: FINE SEDIMENT REMOVAL \nStage 1 is a 5-micron sediment filter cartridge with antimicrobial protection provided by a silver-based antimicrobial agent included in the plastic matrix with a specific technology. The filter housing also has antimicrobial abilities to prevent the build-up of bacteria and algae within the housing. \n \nSTAGE 2: ULTRA VIOLET DISINFECTION UNIT \nStage 2 is a Viqua UV disinfection system for the purposes of inactivation of bacteria and viruses in the incoming water supply. This UV system has an integral countdown timer to indicate when the UV lamp needs to be replaced. UV lamps degrade over time and must be replaced every 12 months. \n \nBENEFITS TO UV DISINFECTION \n-
\n
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye. \n
- Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification. Always use Viqua genuine replacement lamps and sleeves. \n
- The system is simple to maintain and service allowing for easy lamp replacement. \n
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation. \n
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails. Monitored systems are equipped with a UV sensor which provides a continuous readout of UV intensity. \n
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant. \n
- Monitored systems allow for the installation of an optional solenoid valve which will stop the flow of water through the chamber should the UV performance fall below a safe level. \n
Features And Benefits
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye.
- Specially designed and tested Sterilume-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification
- The system is simple to maintain and service allowing for easy lamp replacement.
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant.
Dimensions
| Product Width | 550.00 mm |
| Product Length | 180.00 mm |
| Product Height / Depth | 750.00 mm |
| Product Weight | 17.00 kg |
| Product Volume | 0.00 |
Specifications
| Max pressure | 6 Bar |
| Max Flow Rate @ 16mj/cm2 | 7.8m3/hr |
| Max Flow Rate @ 30mj/cm2 | 4.2m3/hr |
| Inlet/Outlet | 1” BSP |
Find out more
EPS Integrated UV Kit 15gpm - Vh410 15gpm
Item Code: 72665
Delivery - €5.00 inc VAT
Out of stock for delivery
Delivery cost is based on your full basket and will be confirmed at checkout
Available
for delivery (next day delivery if ordered before 1:00pm)
Nationwide delivery
2-3 working days
Available to order
We will text you when on the way
See our delivery information
Free Click & Collect
Out of stock for Click & Collect
Check your local store for details on opening times
Available
for Click & Collect
Available to order for collection
3-5 working days
€
Inc.VAT
€
Ex.VAT
was
€
Inc.VAT
€
Ex.VAT
€
Inc.VAT
was
€
Ex.VAT
(
€
per
)
€964.08
ex VAT
€1,185.82
inc VAT
€964.08
ex VAT
€1,185.82
inc VAT
Short Description
The EPS Integrated UV System is a plug & play disinfection solution. This system is designed to provide high flow and low pressure drop, with a maximum flow rate 2.5 m3/hr*.
Product Information
Powertank Integrated UV System - For Variable Speed Units
\nINSTALLATION & USE \n \nUV systems deactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, and harmful bacteria like Legionella & E.Coli which may be present in some incoming water supplies. \n \nSTAGE 1: FINE SEDIMENT REMOVAL \nStage 1 is a 5-micron sediment filter cartridge with antimicrobial protection provided by a silver-based antimicrobial agent included in the plastic matrix with a specific technology. The filter housing also has antimicrobial abilities to prevent the build-up of bacteria and algae within the housing. \n \nSTAGE 2: ULTRA VIOLET DISINFECTION UNIT \nStage 2 is a Viqua UV disinfection system for the purposes of inactivation of bacteria and viruses in the incoming water supply. This UV system has an integral countdown timer to indicate when the UV lamp needs to be replaced. UV lamps degrade over time and must be replaced every 12 months. \n \nBENEFITS TO UV DISINFECTION \n-
\n
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye. \n
- Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification. Always use Viqua genuine replacement lamps and sleeves. \n
- The system is simple to maintain and service allowing for easy lamp replacement. \n
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation. \n
- The controller visually displays the remaining lamp life and will go into alarm if the lamp fails. Monitored systems are equipped with a UV sensor which provides a continuous readout of UV intensity. \n
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant. \n
- Monitored systems allow for the installation of an optional solenoid valve which will stop the flow of water through the chamber should the UV performance fall below a safe level. \n
Features And Benefits
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye.
- Specially designed and tested Sterilume-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification
- The system is simple to maintain and service allowing for easy lamp replacement.
- Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
- The controller has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant.
Dimensions
| Product Width | 550.00 mm |
| Product Length | 180.00 mm |
| Product Height / Depth | 750.00 mm |
| Product Weight | 17.00 kg |
| Product Volume | 0.00 |
Specifications
| Max pressure | 6 Bar |
| Max Flow Rate @ 16mj/cm2 | 7.8m3/hr |
| Max Flow Rate @ 30mj/cm2 | 4.2m3/hr |
| Inlet/Outlet | 1” BSP |