Short Description
24L Inline Pressure Vessel for use with Pressure Sets for Domestic Pressure Boosting and Light Commercial Use
Product Information
Inline 'Hydrosphere' tanks mount directly on to the pipework. The PressureWave Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel. On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection. PressureWave tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank. PressureWave tanks represent the best value for the investment and are the best quality pressure vessels available today. ** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump ** PressureWave tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting. NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Features And Benefits
- Maintenance Free
- Diaphragm design
- Patented stainless steel water connection
- Two-part polyurethane, epoxy primed paint finish
- Leak-free, O-ring sealed air valve cap
Dimensions
| Product Width | 290.00 mm |
| Product Length | 290.00 mm |
| Product Height / Depth | 447.00 mm |
| Product Weight | 5.52 kg |
| Product Volume | 24.00 ltr |
Specifications
| Maximum working pressure | 10 bar |
| Maximum working temperature | 90 °C |
| Standard System Connection | 1" |
| Tank precharge | 1.9 bar / 28 psi |
Find out more
EPS 24lt Sphere
Short Description
24L Inline Pressure Vessel for use with Pressure Sets for Domestic Pressure Boosting and Light Commercial Use
Product Information
Inline 'Hydrosphere' tanks mount directly on to the pipework. The PressureWave Pressure Vessel Series is constructed of a virgin polypropylene liner combined with an FDA approved high grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded o-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak free and maintenance free pressure vessel. On the exterior, the almond coloured two part polyurethane paint finish over an epoxy undercoating provides hundreds of hours of UV and salt spray protection. PressureWave tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank. PressureWave tanks represent the best value for the investment and are the best quality pressure vessels available today. ** Note: The pre-charge pressure in the vessel should be set 2psi (0.14bar) below the CUT-IN pressure of the pump ** PressureWave tanks are ideally suited for a wide range of applications, including water booster systems, thermal expansion, irrigation systems and hydraulic hammer arresting. NSF Standard 61, CE/PED, WRAS, ACS, ISO-9001, Gost, Evrazes approved
Features And Benefits
- Maintenance Free
- Diaphragm design
- Patented stainless steel water connection
- Two-part polyurethane, epoxy primed paint finish
- Leak-free, O-ring sealed air valve cap
Dimensions
| Product Width | 290.00 mm |
| Product Length | 290.00 mm |
| Product Height / Depth | 447.00 mm |
| Product Weight | 5.52 kg |
| Product Volume | 24.00 ltr |
Specifications
| Maximum working pressure | 10 bar |
| Maximum working temperature | 90 °C |
| Standard System Connection | 1" |
| Tank precharge | 1.9 bar / 28 psi |