Short Description
Ardatec 2K Flex is a two-component, flexible mineral sealing slurry for sealing in a composite (AIV-F) under ceramic coverings and for sealing structures in areas in contact with the ground.
Product Information
Ardatec 2K Flex is a two-component, flexible mineral sealing slurry for sealing in a composite (AIV-F) under ceramic coverings and for sealing structures in areas in contact with the ground. Waterproof, flexible and crack-bridging after setting. Ardatec 2K Flex cures without cracks. Simple and easy to apply using a brush, roller or spatula method. Ardatec 2K Flex is low in chromate according to EU-VO 1907/2006 (REACH) and meets the requirements of building material class B2 "normally flammable" according to DIN 4102-1. Can be used for water exposure classes according to DIN 18531-5 on balconies, according to DIN 18533 for building waterproofing, according to DIN 18534-3 indoors and according to DIN 18535-3 in the pool area.
Features And Benefits
- Bonded seal under ceramic coverings (AIV-F)
- Mineral sealing slurry as building waterproofing in areas in contact with the ground
- flexible and crack-bridging
Supporting Documents
Dimensions
| Product Width | 133.00 mm |
| Product Length | 185.00 mm |
| Product Height / Depth | 282.00 mm |
| Product Weight | 5.50 kg |
Specifications
| Basis | Two-component mineral flexible sealing slurry |
| Density | ca. 1,6 g/ml |
| Mixing Ratio | 15 kg Powder component 5 kg Liquid component |
| Examination after DIBT | Tested positive up to 15 m water column. Approved up to 6 m WS |
| Dry layer thickness for all water exposure classes | 2,0 mm (2,4 mm Wet layer thickness) |
| Dry mortar consumption | ca. 3,8 kg/m² - for 2 coatings |
| Processing temperature | Not below + 5 ° C air, not below + 10 ° C component, up to max. + 25 ° C air temperature |
| Drying time 1st + 2nd layer | ca. 3-4 Hours |
| Temperature resistance | - 20 °C bis + 80°C Building material class B2, normally flammable |
| Building material class | B2, normally flammable according to DIN 4102 |
Find out more
Bostik Ardatec 2k Flex B Bottle 5kg
Short Description
Ardatec 2K Flex is a two-component, flexible mineral sealing slurry for sealing in a composite (AIV-F) under ceramic coverings and for sealing structures in areas in contact with the ground.
Product Information
Ardatec 2K Flex is a two-component, flexible mineral sealing slurry for sealing in a composite (AIV-F) under ceramic coverings and for sealing structures in areas in contact with the ground. Waterproof, flexible and crack-bridging after setting. Ardatec 2K Flex cures without cracks. Simple and easy to apply using a brush, roller or spatula method. Ardatec 2K Flex is low in chromate according to EU-VO 1907/2006 (REACH) and meets the requirements of building material class B2 "normally flammable" according to DIN 4102-1. Can be used for water exposure classes according to DIN 18531-5 on balconies, according to DIN 18533 for building waterproofing, according to DIN 18534-3 indoors and according to DIN 18535-3 in the pool area.
Features And Benefits
- Bonded seal under ceramic coverings (AIV-F)
- Mineral sealing slurry as building waterproofing in areas in contact with the ground
- flexible and crack-bridging
Supporting Documents
Dimensions
| Product Width | 133.00 mm |
| Product Length | 185.00 mm |
| Product Height / Depth | 282.00 mm |
| Product Weight | 5.50 kg |
Specifications
| Basis | Two-component mineral flexible sealing slurry |
| Density | ca. 1,6 g/ml |
| Mixing Ratio | 15 kg Powder component 5 kg Liquid component |
| Examination after DIBT | Tested positive up to 15 m water column. Approved up to 6 m WS |
| Dry layer thickness for all water exposure classes | 2,0 mm (2,4 mm Wet layer thickness) |
| Dry mortar consumption | ca. 3,8 kg/m² - for 2 coatings |
| Processing temperature | Not below + 5 ° C air, not below + 10 ° C component, up to max. + 25 ° C air temperature |
| Drying time 1st + 2nd layer | ca. 3-4 Hours |
| Temperature resistance | - 20 °C bis + 80°C Building material class B2, normally flammable |
| Building material class | B2, normally flammable according to DIN 4102 |